EBL-906 battery charger, ultra fit for AA, AAA, C, D, 9V Ni-MH/Ni-CD rechargeable batteries.
It has both AC and DC plug, smart LCD shows the charging status of each battery (LED for 9V, AC plug included).
Both recharge and discharge function by switch the blue button below the LCD screen.
Negative delta V (- ∆V) cut-off function (except for 9V batteries), overcharge protection, short circuit protection and non-rechargeable or bad cell detection make it more easier for usage.
Specification of charger
Input: AC 100-240V AC 50/60HZ 10W, DC 12V 800mA
Output: AA/AAA/C/D Ni-MH Ni-CD: 1.2V DC*4 1000mA; 9V Ni-MH Ni-CD: DC*2 30mA
Discharge current: 200-300mA
No load power consumption: 1W Max
Full load power consumption: 10W Max
Battery charging rate: >80%
Size: 7.7*3.7*21 inches
Weight: 11.3 ounces
Charging Time Table:
1pcs Battery Type (Ni-MH) Capacity Charging Time (approx)
AAA 500-1200mAh 1-3 hours
AA 1300-2800mAh 1.5-3.5 hours
C 1800-5000mAh 2-6 hours
D 1800-10000mAh 2-10 hours
9V 150-600mAh 5-20 hours
How to change the mode of Charge & Discharge
Press the button for charging and discharging: “CHG” — Charging; “DISCHG” — Discharging;
“ERROR”– install the battery incorrectly or the battery is broken one.
* LED will not turn off when fully charged for 9V battery, please remove the 9V battery timely when fully charged.
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Using environment: 0¡æ to 40¡æ, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.
1 x 906 battery charger
1 x user manual
1 x AC adapter
This EBL-906 charger can charge 1-4 AA/AAA/C/D and 1-2 9V Ni-MH/Ni-Cd rechargeable batteries, independent charging slot, can charge different size batteries freely.
Automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
Controlled by MCU, and using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
Constant current charging mode would protect the batteries against current fluctuation and keep using the charger safely.
AC and DC input design, applied to worldwide voltage – AC 100-240V 50/60Hz, convenient everywhere.